Additional Cone & Ring Loader for the Morpheus Vacuum Erection Devices
Take apart the Cone from the Ring Loader. These two items are connected to protect the fingertips of the ring loader.
Place the cone on the cylinder (it will only properly fit one end) The Cone will sit loosely.
The Loading Cone simply sits loosely on the Cylinder Tube. The Cone is to assist you in pulling the constriction ring over the cone and on to your tube.
Choose your Ring Size. Slide the “middle hole” of the constriction ring over the cone and on to the Cylinder. Using a few “pea” size amounts of water-based lubricant will help slide the constriction ring over the tip of the cone and down onto the cylinder.
This can be stretched down with your hands OR
Place the finger tips of the Morpheus Ring Loader inside the middle hole of the constriction ring (with the ring remaining on the tip of the cone). Make sure cylinder is held straight up and down. Using some force quickly push down on the ring loader using one quick motion until the ring grasps the top of the cylinder.
Once the Ring is slid onto the cylinder, you can now remove the cone. You are done using the cone.
Select either Adaptor Bushings of your choice (there are two included) and insert it into the cylinder. It will only properly fit one end of the cylinder. These adaptor bushings are provided to help fit different size users.
It is recommended to read the Morpheus User Manual Booklet in its entirety.